We know that the uncertainties and unknowns of the Coronavirus (COVD-19) pandemic have impacted all of us.
With the LEVELS reopening, businesses of all sizes have been grappling with how to reopen safely for employees and customers. With regular professional disinfection and use of our micro biostatic agent, or antimicrobial shield, you can be assured of your due diligence in providing enhanced and enduring protection. Our chemicals have advanced inhibiting effects on bacteria, viruses, algae, and fungus.
Antimicrobial shield prevents bacteria, fungus and/or certain viruses (e.g., influenza), from growing and living on the coated surface for approximately three months. This is especially beneficial in high-touch and highly susceptible areas such as workstations, door handles, light switches, and bathrooms. We call this HFCPs (Human Frequent Contact Points).
HAZGIENE knows that disinfection without continual maintenance is only good at the time of application. As soon as the disinfectant evaporates, the killing and inactivation of microbes stop, as with most available chemicals and applications on the market. Therefore, ongoing preventative maintenance and the application of an antimicrobial shield to surfaces is so critical to giving you enduring protection.
While many companies can clean your facility, only HAZGIENE can disinfect and independently verify, through scientific testing, the efficacy of its disinfection process. This surface testing is key to risk mitigation. On one hand, it can alert you of an infection, on the other, it can evaluate the thoroughness and effectiveness of disinfection. Combined with proper ongoing disinfection and antimicrobial shield application, surface testing provides an extra layer of measurability and accountability and is imperative for proactive controls and the efficacy of containment measures.
Cleaning removes germs, dirt, grease, and grime from a surface, usually done with soap or generalised cleaning products, and water, and has no major bearing on the killing of germs, bacteria, or viruses. While it may partially remove them and make surfaces appear clean to the naked eye, it is often just the first step in the disinfection process.
Disinfecting uses specialised chemicals registered with the Environmental Protection Agency (EPA) to kill germs, bacteria, or viruses on surfaces. Although disinfecting does not necessarily give the surface a ‘clean’ look, it is highly effective in the total removal of active germs to stop the spread of infection. Disinfectants are very carefully and deliberately created to treat certain bacteria and viruses, and so they are rarely a one-size-fits-all solution. They have different kill spectrums, cure times, mixing instructions, and importantly, application directions, so be sure to read the label carefully when selecting and using a disinfectant. A disinfect is not effective if it is not used properly.
Sanitising is simply lowering the number of germs on a surface to a safe level, as prescribed sanitising by public health authorities. It does not necessarily mean that the presence of germs is totally eradicated, but rather that they may not be numerous enough to cause immediate health concerns. Sanitisation does not remove the threat posed by viruses and infectious diseases.
Disinfectants that have been registered with the EPA can be expected to kill or inactivate microbes listed on the approved label (kill sheet), in the number of minutes indicated on the label (cure time), when applied according to label directions (application directions). As soon as the disinfectant evaporates, the killing and inactivation stops, or at the moment of application. The purpose of a disinfectant is to kill or inactivate microbes on the initial application. Because of this, regular scheduled cleaning and disinfection is recommended.
One effective method is to apply a coating of a micro biostatic agent, or antimicrobial shield, that has been proven to prevent specific microbes from surviving on the coated surface for a period after its application. Like disinfectants, microbiostatic agents with any antimicrobial claims must be registered with the EPA. HAZGIENE Antimicrobial Shield has EPA registered chemicals for durable biostatic activity against a host of microbes, including bacteria, fungi and algae, when properly applied. Independent studies have also found that the ingredients in our antimicrobial shield are effective at inactivating enveloped viruses upon contact with the properly coated surface.
Antimicrobials are complex chemicals that have a chemistry that binds them to surfaces and chemistry that keeps microbes from growing and continuing to be viable. The effective action that destroys the microbe is physical, electrical, and chemical: it electrically attracts the microbe and it physically breaks the microbe open by piercing the lipid layer of the cell wall.
The application of the HAZGIENE Antimicrobial Shield must be applied according to label directions for the surface being treated. For non-porous surfaces, the application of the shield requires that the surface first be cleaned to remove grease, grime and gross surface contamination followed by disinfection with an EPA registered disinfectant. This prepares the surface to receive the shield solution. After a period of a few minutes, the coating is dry and ready to prevent microbes from thriving on the surface for an extended period.
The HAZGIENE Antimicrobial Shield should be reapplied every month to maximise effectiveness. The reason for reapplication is because the invisible coating will eventually be shed through repeated touching. High abrasion areas due to traffic of people, product and equipment will require more frequent applications.
HAZGIENE Antimicrobial Shield dries clear and is safe for both porous and non-porous surfaces. The application is approximately 20 microns thick but dries to less than one micron in thickness. Our product is food safe for contact surfaces.
Yes, HAZGIENE Antimicrobial Shield is suitable for application on hard and soft surfaces, including the following porous materials that are often left untreated due to their composition:
With vast experience in the field of disinfection and decontamination, we are proud to offer our antimicrobial shield. We frequently consult with the Centers for Disease Control and Prevention (CDC), EPA, and Occupational Safety and Health Administration (OSHA) to ensure that our processes and procedures meet or exceed their recommendations and guidelines.
Let HAZGIENE be your partner in combating this global pandemic, where safety is our number one concern. Our SARS-CoV-2 response team will work with you to develop a plan that is suitable for your employee and business needs, giving you 360-degree peace of mind. For immediate assistance or questions please contact us.
We are very happy with the service from HAZTECH.
HAZGIENE was great! They responded quickly to the request, understanding the urgency of the situation. Their team leader was efficient in his quoting and the team was pleasant and professional. Thank you for a job well done.
Highly recommended!
We use HAZKLEEN for Elevated Cleaning and HAZGIENE for SARS-cov-2 in our 32000m2 plant. HAZSAN supplies our sanitation chemicals. They respond promptly! I would highly recommend them.
The service from HAZGIENE has been excellent! You guys are quick to respond and so helpful!
I really do appreciate everyone’s efforts and quick response – the sanitizing and installation went off smoothly and your staff are friendly and helpful.
Thank you for the team’s swift response and professional conduct. They spent time to explain the process and took us through it step by step.
Thanks for the awesome quick response! Fantastic!
Thanks for your quick response today on our code red.